Safety Information
CAUTION: To reduce the risk of fire, electric shock, or injury to persons:
• For indoor use only.
• Do not place in reach of children.
• NOT FOR EMERGENCY LIGHTING.
• Light strips only connect to adjacent units.
• Suitable for surface and cabinet mounting.
• Operating Temperature: -20
℃
~40
℃
(-4
℉
~104
℉
)
• Operating Humidity: 10%~90%RH, Non-condensing
• Use only insulated staples or plastic ties to secure cords.
•
Not intended for recessed installation in ceilings, or soffit.
• Do not use the device where wireless devices are not allowed.
•
Keep the device away from water, fire, wet or hot environments.
•
Adapter shall be installed near the equipment and shall be easily accessible.
• The maximum distance to the receptacle is determined by the length of adapter cord.
•
Only use the control provided with or specified by these instructions to control this device.
•
Switch off the power supply to the device and allow sufficient time for it to cool before handling it.
•
Suitable for dry and damp locations, keep the device away from water, fire, wet or hot environments.
• Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.
• Do not use damaged charger to charge the device. Do not use any other charger than those recommended.
• Avoid placing controller box in areas surrounded by mental or near other devices designed to receive or transmit radio signals.
•
Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are able to be read during replacing;
•
Please disconnect this strip from AC outlet before cleaning. Do not use liquid or detergent to clean the product. Only use a dry cloth. Drop or fall
could cause injury.
•
Use only power supplies which are provided by manufacture and in the original packing of this product, if you have any questions, please don’t
hesitate to contact us.