17
4.7.4 Configure Gateway ONT
(
HGU
)
Multicast Service--ZTE Solution
premise condition
OLT connect to uplink device and open multicast service
OLT have created vlan for multicast
OLT have configured GE port multicast vlan
ONT have registered
1.
Config Config service port
OLT(config)#
service-port 7 vlan 200 gpon 0/0 port 1 ont 3 gemport 3 multi-service user-vlan
200 tag-action transparent
2.
Create bridge wan in ont web
Click Network
WAN
WAN Connection. Type select to Bridge. Connection Name select to
Create WAN Connection. Port Binding check LAN4. Service List select to OTHER. VLAN
Mode select to Used. VLAN ID enter 200. Finally click Create.
NOTE
:
Type select to
Bridge
. Connection Name select to
Create WAN Connection
. Port Binding check
LAN4
. Service List select to
OTHER
. VLAN Mode select to
Used
. VLAN ID enter
200
. Enable
DHCP keep default unchecked status.
3.
Check ONT Bridge wan status
Click Status
Network Interface
WAN Connection (IPv4).