-96-
Max Echo-Requests:
Specify the maximum number of Echo-Requests sent by the server to
wait for response. The default is 10. The link will be dropped when the
number of the unacknowledged LCP echo requests reaches your
specified Max Echo-Requests.
Idle Timeout:
Enter the maximum idle time. The session will be terminated after it
has been inactive for this specified period. It can be 0-10080 minutes.
If you want your Internet connection to remain on at all times, enter 0
in the Idle Timeout field. The default value is 30.
tication type. It can be Local authentication and
Remote authentication. Select Local authentication for authentication
in PPPoE server and select Remote authentication for authentication
Auth Protocol:
Select at least one authentication protocol for Local Authentication.
is more secured for it adopts three handshakes and does
transfer password in plain text.
MS-CHAP, put forward by Microsoft, adopts a different encryption
algorithm of CHAP.
MS-CHAP.
It is available when Remote Authentication is selected. RADIUS
on Dial In User Service) provides an
r address for
Shared Key:
Enter the Shared Key for Remote authentication. It should be the
same to the shared key of the Radius Server.
3.6.1.2
IP Address Pool
On this page, you can define or edit the IP Address Pool.
Choose the menu
Services
→
PPPoE Server
→
IP Address Pool
to load the following page.
Authentication:
Select the Authen
in the remote server.
PAP, transferring username and password in plain text in the
network, is used in a less secured network.
CHAP
not
MS-CHAP v2 with a higher security is an improved version of
Radius Server:
(Remote Authenticati
authentication for dial-up users. Enter the Radius Serve
Remote authentication.