-150-
pgrade and so on.
TP-LINK
#
This command will reboot system, Continue?[Y/N]
Reboot the system. Y means
system, Continue?[Y/N]
Restore to factory default. Y
means YES, N means NO.
Server address: [192.168.1.101]192.168.1.100
p
Password:
[admin]ftp
File name: [config.bin]
Example: There is a FTP
server with IP address of
the
current configuration file with
the default name as
er,
follow the configuration on
the left.
guration file < config.bin > ...
config bin > succeed, file size is 7104 bytes.
5.4.3 sys
The
sys
command is used for system management, including Backup and Restore, Factory Default,
Reboot, Firmware U
sys reboot
YES, N means NO.
TP-LINK
#
sys restore
This command will restore
TP-LINK
#
sys export config
Export the configuration file.
Username:
[admin]ft
192.168.1.100 and both the
user name and password of
which is ftp. To save
config.bin to this FTP serv
Try to save the confi
Save configuration file <
Note:
●
TP
F
service is required for importing or exporting configuration files and system upgrade. The
parameter
Server address
is the IP address of the host to provide FTP service,
Username/Password is the
Username/Password
to login the FTP service and
File name
is the
name of the configuration file (change the file name if the configuration file with the same name is
existed).
●
The parameters in the brackets are default setting and you can enter the actual parameters
behind them. Press
Enter
key directly if there are no changes.
●
TL-ER6120 connects to the FTP server using port 21 by default.