-156-
mote management function enabled cannot be
1. Ma
t the IP address o
mputer is in the subnet allowed to remotely access
the router.
2. If the router’s management po
add
3. Check to see if the managemen
service port of the LAN host in the
Virtual Server function. If so, you should change the router’s management port or virtual server’s
r
4. Make sure that the NAT DMZ service is disabled.
Q4: Some f
are the common values of the Sub
Subnet Mask is a 32-bit binary address used for distinguishing the network address and the host
address
amount
subnet is dif
After co
d
be 8 (w
t S
nts the
default Subnet Mask value of class B: 255.255.0.0), 24 (which represents the default Subnet Mask
value of class C: 255.255.255.0) or
255.255
Q3: What can I do if the router with the re
accessed by the remote computer?
ke sure tha
f the remote co
rt has been modified, please log into the router with the new
0.1:XX (“XX” is the new management port number).
t port has been mapped to the
ress, such as http://192.168.
se vice port.
unctions of the router need to define the IP address subnet with Subnet Mask. What
net Mask?
. When dividing the network
of hosts in each
, the different Subnet Mask defines different subnet, and the
ferent.
nverse from 32-bit binary ad
hich represents the defaul
dress to decimal address, the common Subnet Mask values can
ubnet Mask value of class A: 255.0.0.0), 16 (which represe
32 (which represents the default Subnet Mask value of class D:
.255.255).