-24-
MTU:
MTU (Maximum Transmission Unit) is the maximum data unit
ansmitted by the physical network. It can be set in the range of
1460. The default MTU is 1460. It is recommended to keep the
vided by your ISP.
Active Mode:
n to manually activate or terminate the
connection charged on time.
ished automatically when it is
down.
Secondary
Connection:
Connection Type:
condary connection type. Options include Disable,
Dynamic IP and Static IP.
IP Address:
If Static IP is selected, configure the IP address of WAN port. If
port obtained is
displayed.
Subnet Mask:
If Static IP is selected, configure the subnet mask of WAN port. If
Dynamic IP is select, the subnet mask of WAN port obtained is
Default Gateway:
If Static IP is selected, configure the default gateway. If Dynamic IP is
selected, the obtained default gateway is displayed.
Primary DNS/
Secondary DNS:
If Static IP is selected, configure the DNS. If Dynamic IP is selected,
the obtained DNS is displayed.
Upstream Bandwidth:
Specify the bandwidth for transmitting packets on the port.
Downstream
Bandwidth:
Specify the bandwidth for receiving packets on the port.
Server IP:
Enter the Server IP provided by your ISP.
tr
576-
default value if no other MTU value is pro
You can select the proper Active mode according to your need.
Manual: Select this optio
Internet connection by the <Connect> or <Disconnect> button.
It’s optimum for the dial-up
Always-on: Select this option to keep the connection always on.
The connection can be re-establ
Here allows you to configure the secondary connection. Dynamic IP
and Static IP connection types are provided.
Select the se
Dynamic IP is selected, the IP address of WAN
displayed.