-28-
Note:
To ensure the BigPond connection re-established normally, please restart the connection at least 5
seconds after the connection is off.
3.1.4 LAN
3.1.4.1
LAN
On this page, you can configure the parameters for LAN port of this router.
Choose the menu
Network
→
LAN
→
LAN
to load the following page.
Figure 3-12 LAN
The fo
displayed
LAN
IP Address:
Enter the LAN IP address of the router. 192.168.0.1 is the default IP
Subnet Mask:
The default subnet mask is 255.255.255.0.
llowing items are
on this screen:
address. The Hosts in LAN can access the router via this IP address.
It can be changed according to your network.
Enter the Subnet Mask.
Note:
If the LAN IP address is changed, you must use the new IP address to log into the router. To guarantee
a normal communication, be sure to
dress and the Subnet Mask of the Hosts on
set the Gateway ad
the LAN to th
address and
3.1.4.2
DHCP
The router with its DHCP (Dyna
erver enabled can automatically
assign an IP address to the computers in the local area network.
Choose the menu
Network
→
LA
e new LAN IP
the Subnet Mask of the router.
mic Host Configuration Protocol) s
N
→
DHCP
to load the following page.