-40-
Flow Control:
Allows you to enable/disable the Flow Control function.
Negotiation Mode:
Select the Negotiation Mode for the port.
All Ports:
Allows you to configure the parameters for all the ports at one time.
3.1.7.5
Port Status
ch port.
Network
→
Switch
→
Port Status
to load the following page.
On this page, you can view the current status of ea
Choose the menu
Figure 3-24 Port Status
3.1.7.6
Port VLAN
A VLAN (Virtual Local Area Network) is a network topology configured according to a logical scheme
rather than the physical layout, which allows you to divide the physical LAN into multiple logical LANs
so as to control the communication among the ports.
The VLAN function
creating VLANs in a
can prevent the broadcast storm in LANs and enhance the network security. By
physical LAN, you can divide the LAN into multiple logical LANs, each of which
N communicate with one another as if they
with one another directly.
Therefore, broadcast p
TL-ER6120 provides the Port VLAN function, which allows you to create multiple logical VLANs for the
LAN ports based on their port numbers.
Choose the menu
Network
→
Switch
→
Port VLAN
to load the following page.
has a broadcast domain of its own. Hosts in the same VLA
are in a LAN. However, hosts in different VLANs cannot communicate
ackets are limited in a VLAN.