-93-
Enter the IP address of the client which is allowed to connect to this
Remote Subnet:
Enter the IP address range of your remote network. (It's always the IP
address range of LAN on the remote peer of VPN tunnel.) It’s the
activate the entry.
In this table, you can view your configurations of the tunnels and edit them by the action buttons.
The No.1 entry in Figure 3-63 indicates: this tunnel is encapsulated by using L2TP. Its user name
is test, the password can be configured, and the router is configured in Client mode. The remote
server is 116.10.10.10 and the remote subnet is 192.168.2.0/24. This entry is enabled.
3.5.3.2
IP Address Poo
Client IP:
L2TP/PPTP server. The default IP "0.0.0.0" means any IP address is
acceptable.
IP Address Pool:
Select the IP Pool Name to specify the address range for the server's
IP assignment. This item is available for Server mode.
combination of IP address and subnet mask.
Status
Activate or in
List of Configurations
l
On this page, you can configure the IP Address Pool.
Choose the menu
VPN
→
L2TP/PPTP
→
IP Address Pool
to load the following page.
Figure 3-64 IP Address Pool
his screen:
The following items are displayed on t