Quick Installation Guide
300Mbps Wireless N DOCSIS 3.0
Cable Modem Router
7106505475 REV1.0.0
1. Keep the power on at all times during this process.
2. If the Internet LED is blinking or off, please call your ISP’s customer service.
3. If the wireless LED is off, please press the WiFi button on the front panel,
then check the LEDs again.
Connect the Hardware
Activate the Modem Router
Enjoy the Internet
TC-W7960
For additional configuration, log into the web-based management
page at
http://tplinkmodem.net
or
http://192.168.1.1
, and enter
admin
(all lowercase) for both username and password.
2
3
1
1
Wait for about 1 minute until the following LEDs are solid on.
Notes:
Connect the coaxial cable and power adapter to the modem
router, then power on your modem router.
Connect your computer to the modem router via a wired or
wireless connection.
Internet
Coaxial cable
Power adapter
Serial Number
MAC Address
SSID
Wireless Password/PIN
Information Card
Connect the computer to the modem router’s LAN port via an Ethernet cable.
On your computer, select and connect to the modem router’s wireless network.
The default wireless network name (SSID) and password are on the provided
Information Card
.
Or you can set up a connection via the WPS button
, which
is
on the front
panel of the modem router. For more information about WPS, refer to the User
Guide at www.tp-link.com.
Wired:
Wireless:
If the Internet is not accessible, contact your ISP and make sure that the modem
router is activated.
Note:
Get your account information and the provided Information
Card ready.
Comcast Xfinity
www.comcast.com
1-800-934-6489
1-855-704-4503
www.timewarnercable.com
Time Warner Cable
The contact information listed might change. You can also find the contact number in your
monthly Internet service billing statement.
For Comcast and Time Warner Cable (TWC):
Launch a web browser, and visit any website. You will be
automatically redirected to your service provider’s
self-activation page.
Follow the on-screen instructions to activate the modem
router.
If you are unable to self-activate your modem router, call your ISP’s
customer service.
3
2
