TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
2)
Before upgrading the Router’s firmware, you should write down some of your customized
settings to avoid losing important configuration settings of the Router.
3)
Do not turn off the Router or press the
Reset
button while the software is being updated.
4)
The Router will reboot after the Upgrading is finished.
4.7.7 Reboot
Choose “
Management
”
Æ
“
Reboot
”, you can see the screen (shown in Figure 4-107) which allows
you to reboot the Router.
Figure 4-107
)
Note:
1)
After you clicked the
Reboot
button, please wait for a while before reopening your web
browser.
2)
Do not turn off the Router or press the
Reset
button while the Router is rebooting.
3)
If necessary, reconfigure your PC's IP address to match your new configuration.
91
