TD-W8962ND
300Mbps Wireless N ADSL2+ Modem Router User Guide
26
Figure 4-5
ATM Configuration:
¾
VPI (0~255):
Identifies the virtual path between endpoints in an ATM network. The valid range
is from 0 to 255. Please input the value provided by your ISP.
¾
VCI (1~65535):
Identifies the virtual channel endpoints in an ATM network. The valid range is
from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value
provided by your ISP.
Click
Advanced
, advanced selections of ATM Configuration can be shown.
¾
Encapsulation Mode:
Select the encapsulation mode for the Static IP Address. Here you
can leave it default.
¾
ATM Qos Type:
Select ATM Qos Type provided by ISP, and the type is UBR by default.
WAN Service Setup:
¾
IP Address:
Enter the IP address in dotted-decimal notation provided by your ISP.
¾
Subnet Mask:
Enter the subnet Mask in dotted-decimal notation provided by your ISP,
usually is 255.255.255.0.
¾
Default Gateway
(Optional): Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
¾
DNS Server/ Secondary DNS Server:
Here you can set DNS Server (at least one) manually.
The Route will use this DNS Server for priority.
¾
Default Gateway:
select a WAN Interface from the drop-down list as the IPv4 default
gateway.
