TD-W8962ND
300Mbps Wireless N ADSL2+ Modem Router User Guide
28
Internet, please select the check box. If another Router exists in your network, you don’t need
to select the option.
¾
Enable Fullcone NAT
: It is a type of NAT, if not enabled, the default NAT will act.
¾
Enable SPI Firewall:
A SPI firewall enhances network’s security. Select the option to use a
firewall, or else without a firewall.
¾
Enable
IGMP Proxy
: IGMP (Internet Group Management Protocol) is used to manage
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for
client devices, such as the Modem Router. The default value is disabled, and if you are not
sure, please contact your ISP or just leave it.
¾
Get IP Unicast:
This is disabled
by default. The minority of DHCP Server of ISP will not
support to enable this. When the Route is connected right but IP cannot get, you can select
this box.
¾
Primary DNS Server/ Secondary DNS Server:
Choose
“Set DNS Server manually”, you can
set DNS Server (at least one) manually here. The Route will use this DNS Server for priority.
Click the
Save
button to save the settings.
4.5.1.3 PPPoE
If your ISP provides a
PPPoE
connection and you need to use an ATM Interface, choose
PPPoE
in the drop-down list, and then the screen will be displayed as below.
Figure 4-7
¾
PPP Username/Password/Confirm Password
: Enter the User Name, Password and
Confirm Password provided by your ISP. These fields are case-sensitive.
