TD-W8962ND
300Mbps Wireless N ADSL2+ Modem Router User Guide
29
¾
Authentication Method
: Select the
Authentication Method
from the drop-down list, the
default method is
AUTO_AUTH
, and you can leave it as a default setting.
¾
Choose the right connection type according to your needs:
For PPPoE connection, you
can select
Connect on demand
or
Connect automatically
or
Connect manually
. Connect
on demand is dependent on the traffic. If there is no traffic (or
Idle
) for a pre-specified period
of time), the connection will tear down automatically. And once there is traffic send or receive,
the connection will be automatically on.
Click
Advanced
, advanced selections for WAN Service Setup can be shown.
¾
Service Name/Server Name
: Enter the Service Name and Server Name if it was provided by
your ISP. You can leave them blank, if the ISP doesn’t provide them.
4.5.1.4 PPPoA
If your ISP provides a
PPPoA
connection and you need to use an ATM Interface, choose
PPPoA
in the drop-down list, and then the screen will be displayed as below.
The configuration is similar to
PPPoE
. Please refer to the section
4.4.14 PPPoE
to configure this
part.
Figure 4-8
4.5.1.5 IPoA
If your ISP provides an IPoA connection, select
IPoA
option for the
WAN service type
on the
screen.
