TD-W8968
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
8. On the next screen (as shown Figure 4-19) you will see the detailed settings you’ve made.
Please click the
Apply/Save
button to save these settings.
Figure 4-19
4.5.2.3 ATM-EoA-Bridging
If you want to adopt the
Bridge
service and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select
EoA
option for DSL Link Type (see
).
2. Click
the
Add
button on the screen Figure 4-7. Select WAN Service Interface over ATM PVC
on the next screen (as shown Figure 4-8).
3. Select
Bridging
option for the
WAN service type
on the screen (as shown Figure 4-9), and
click
Next
button to continue.
4. On the screen (as shown Figure 4-13) you will see the detailed settings you’ve made. Please
click the
Apply/Save
button to save these settings.
4.5.2.4 ATM-PPPoA
If your ISP provides a
PPPoA
connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select
PPPoA
option for DSL Link Type (see
).
2. Click
the
Add
button on the screen Figure 4-7 and the next configuration is similar to
PPPoE
,
)
. The difference is that you don’t need to set the
PPPoE Service Name
and
Bridge PPPoE Frames Between WAN and Local Ports
on the
4.5.2.5 ATM-IPoA
If your ISP provides an
IPoA
connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface.
1. Add a new ATM interface and select
IPoA
).
27
