TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
Tunnel access from local IP addresses:
Choose Subnet if you want the Whole LAN to join
the VPN network, or else choose Single Address if you want single IP to join the VPN network.
IP Address for VPN:
Enter the IP address of your LAN. (For example: Input
192.168.1.1
in
Device1
, Input
192.168.2.1
in
Device2
)
IP Subnetmask:
Enter the Subnet mask of your LAN. ( For example: Input
255.255.255.0
in
both
Device1
and
Device2
)
Tunnel access from remote IP addresses:
Choose Subnet if you want the Remote Whole
LAN to join the VPN network, or else choose Single Address if you want single IP to join the
VPN network.
IP Address for VPN:
Enter the IP address of the Remote LAN. ( For example: Input
192.168.2.1
in
Device1
,Input
192.168.1.1
in
Device2
)
IP Subnetmask:
Enter the subnetmask of the remote LAN. ( For example: Input
255.255.255.0
in both
Device1
and
Device2
)
Key Exchange Method:
Select Auto (IKE) or Manual.
Authentication Method:
Select Pre-Shared Key (recommended).
Pre-Shared Key:
Input the Pre-Shared key for Authentication. (For example: Input 12345678)
Perfect Forward Secrecy:
PFS is an additional security protocol.
We recommend you leave the Advanced Settings as default value.
After complete the basic settings and click Save/Apply in both
Device1
and
Device2
, PCs in LAN1
could communicate with PCs in remote LAN2. (For example: You can ping the IP address of PC2
which is 192.168.2.100 in PC1)
Note:
The VPN Servers Endpoint from both ends must use the same pre-shared keys and Perfect
Forward Secrecy settings.
Click
Show Advanced Settings
and then you can configure the Advanced Settings.
42
