TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
Click any of them, and you will be able to configure the corresponding function.
4.6.1 DHCP Settings
Choose menu “
DHCP Server
”
“
DHCP Settings
”, you can configure the DHCP Server on the
page as shown in Figure 4-30.The modem router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the modem router on the LAN.
Figure 4-30
Start IP Address:
Enter a value for the DHCP server to start with when issuing IP addresses.
Because the default IP address for the modem router is 192.168.1.1, the default Start IP
Address is
192.168.1.100
, and the Start IP Address must be 192.168.1.100 or greater, but
smaller than 192.168.1.254.
End IP Address:
Enter a value for the DHCP server to end with when issuing IP addresses.
The End IP Address must be smaller than 192.168.1.254. The default End IP Address is
192.168.1.254
.
Address Lease Time:
The Leased Time is the amount of time in which a network user will be
allowed connection to the modem router with their current dynamic IP address. Enter the
amount of time, in hours, then the user will be “leased” this dynamic IP address. After the
dynamic IP address has expired, the user will be automatically assigned a new dynamic IP
address. The default is
24
hours.
Default Gateway -
(Optional.) It is suggested to
input the IP address of the LAN port of the
modem router. The default value is 192.168.1.1.
Default Domain -
(Optional.) Input the domain name of your network.
Primary DNS -
(Optional.) Input the DNS IP address provided by your ISP or consult your
ISP.
44
