TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
Note:
If
11b only
,
11g only
, or
11bg mixed
is selected in the
Mode
field, the
Channel Width
selecting
field will turn grey and the value will become 20M, which is unable to be changed.
Enable SSID Broadcast:
When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the modem router. If you select the
Enable SSID Broadcast
checkbox, the Wireless Router will broadcast its name (SSID) on the
air.
Enable WDS:
Check this box to enable WDS. With this function, the modem router can bridge
two or more Wlans. If this checkbox is selected, you will have to set the following parameters
as shown in the figure below. Make sure the following settings are correct.
SSID (to be bridged):
The SSID of the AP your modem router is going to connect to as a
client. You can also use the search function to select the SSID to join.
BSSID (to be bridged):
The BSSID of the AP your modem router is going to connect to as a
client. You can also use the search function to select the BSSID to join.
Scan:
Click this button, you can search the AP which runs in the current channel.
Key type
: This option should be chosen according to the AP's security configuration. It is
recommended that the security type is the same as your AP's security type
WEP Index
: This option should be chosen if the key type is WEP(ASCII) or WEP(HEX). It
indicates the index of the WEP key.
Auth Type
: This option should be chosen if the key type is WEP(ASCII) or WEP(HEX). It
indicates the authorization type of the Root AP.
Password
:
If the AP your modem router is going to connect needs password, you need to fill
the password in this blank.
Click
Save
to save your settings.
4.8.2 WPS Settings
This section will guide you to add a new wireless device to an existing network quickly by
WPS
(also called
QSS
)
function.
a). Choose menu “
WPS Settings
”, and you will see the next screen (shown in Figure 4-38).
50
