TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
The methods to add a new rule:
1. Click the
Add New
button and the next screen will pop up as shown in Figure 4-80.
2. Give a name (e.g. Rule_1) for the rule in the
Description
field.
3. Select a host from the
LAN
Host
drop-down list or choose “
Add LAN Host
”.
4. Select a target from the
WAN Host
drop-sown list or choose “
Add WAN Host
”.
5. Select a schedule from the
Schedule
drop-down list or choose “
Add Schedule
”.
6. In the
Action
field, select
Deny
or
Allow
to deny or allow your entry.
7. In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
8. In the
Direction
field, select
IN
or
OUT
from the drop-down list for the direction.
9. In the
Protocol
field, here are four options, All, TCP, UDP, and ICMP. Select one of them
from the drop-down list for the target.
10. Click the
Save
button.
Figure 4-80
4.15.2 LAN Host
Choose menu “
Firewall
”
→
“
LAN
Host
”, and then you can view and set a Host list in the screen
as shown in Figure 4-81.
Figure 4-81
Description:
Here displays the description of the host and this description is unique.
Address Info:
Here displays the information about the host. It can be IP or MAC.
Edit:
To modify an existing entry.
86
