TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
4.16.1 IPv6 Rule
Choose menu “
IPv6 Firewall
”
→
“
IPv6 Rule
”, and then you can view and set Access Control
rules in the screen as shown in Figure 4-88.
Figure 4-88
Enable IPv6 Firewall:
Select the check box to enable the IPv6 Firewall function, so the
Default Filtering Rules can take effect.
Description:
Here displays the description of the IPv6 rule and this name is unique.
IPv6 LAN Host:
Here displays the LAN host selected in the corresponding rule.
Target:
Here displays the target selected in the corresponding rule.
Schedule:
Here displays the schedule selected in the corresponding rule.
Status:
Here displays the status of the rule either enabled or disabled.
Edit:
Here you can edit or delete an existing rule.
To add a new IPv6 rule:
1. Click the
Add New
button, and you will see the screen as shown in Figure 4-89.
Figure 4-89
2. Give a name (e.g. Rule_1) for the rule in the
Description
field.
3. Select a host from the
IPv6
LAN
Host
drop-down list or choose “
Add IPv6 LAN Host
”.
90
