TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
4.15 IPv4 Firewall
There are four submenus under the Firewall menu:
Rule
,
LAN
Host
,
WAN
Host
and
Schedule
.
Click any of them, and you will be able to configure the corresponding function.
4.15.1 Rule
Choose menu “
Firewall
”
→
“
Rule
”, and then you can view and set Access Control rules in the
screen as shown in Figure 4-79.
Figure 4-79
Enable Firewall:
Select the check box to enable the Firewalll function, so the Default Filtering
Rules can take effect.
Description:
Here displays the description of the rule and this name is unique.
LAN Host:
Here displays the host selected in the corresponding rule.
Target:
Here displays the target selected in the corresponding rule.
Schedule:
Here displays the schedule selected in the corresponding rule.
Status:
Here displays the status of the rule, enabled or not.
Edit:
Here you can edit or delete an existing rule.
Add New:
Click the
Add New
button to add a new rule entry.
Enable Selected:
Click the
Enable Selected
button to enable the selected rules in the list.
Disable Selected:
Click the
Disable Selected
button to disable the selected rules in the list.
Delete Selected:
Click the
Delete Selected
button to delete the selected entries in the table.
85
