30
Chapter 4
Manage Your Access Point
4. (Optional) Enable
Night Mode
and specify the
LED Off Time
as needed, and the LEDs
will be off during the period.
5. Click
Save
.
4. 3. SNMP
SNMP (Simple Network Management Protocol) is a popular network monitoring and
management protocol.
1. Visit
, and log in with the password you set for the access point.
2. Go to
Settings
>
System Tools
>
SNMP
.
3. Enable
SNMP Agent
.
4. Enter the contact email address in
SysContact
field, a user-defined name in
SysName
field and the physical location in
SysLocation
of the node to be managed.
5. Enter the community name in
Get Community
field that allows read-only access
to the device’s SNMP information. The community name is considered as a group
password. The default setting is
public
.
6. Enter the IP address or subnet in
Get Source
field that management systems can
read information from this ‘get’ community.
7. Enter the community name in
Set Community
field that allows read/write access to
the device’s SNMP information. The community name can be considered as a group
password. The default setting is
private
.
8. Enter the IP address or subnet in
Set Source
field that management systems can
read and write to this ‘set’ community.
9. Click
Save
.
