TL-WN353G
54M Wireless PCI Adapter User Guide
17
Figure 3-8
Step 1:
Select the “WPA-PSK” as the Network Authentication.
Step 2:
Select the “TKIP” as Data encryption.
Step 3:
Enter the Network key and confirm it.
Step 4:
Click the
OK
to save the configuration.
4. WAP2-PSK
authentication
When you select the
WPA2-PSK
as the authentication, the available data encryptions are TKIP
and AES. Please select the one according your need.
)
Note:
The configuration for WPA2-PSK and WPA-PSK are similar, you can refer to WAP-PSK
authentication to configure it.
5. WPA
802.1x
When you select the
WPA 802.1x
as the authentication, the available data encryptions are TKIP
and AES. For the authentication, you should configure the 802.1x security. Select the EAP Type
and configure the corresponding options.
