TL-WR1043ND
450Mbps Wireless N Gigabit Router
-105-
To set time automatically:
1. Select your local time zone.
2. Enter the address or domain of the
NTP Server I
or
NTP Server II
.
3. Click the
Get GMT
button to get system time from Internet if you have connected to the
Internet.
To set Daylight Saving:
1. Check the box to enable Daylight Saving.
2. Select the start time from the drop-down lists in the
Start
field.
3. Select the end time from the drop-down lists in the
End
field.
4. Click the
Save
button to save the settings.
Figure 4-109 Time settings
Note:
1. This setting will be used for some time-based functions such as firewall. You must specify
your time zone once you login to the router successfully, otherwise, these functions will not
take effect.
2. The time will be lost if the router is turned off.
3. The router will automatically obtain GMT from the Internet if it is configured accordingly.
4. The Daylight Saving will take effect one minute after the configurations are completed.
4.20.2 Diagnostic
Choose menu
“
System Tools
→
Diagnostic
”, and then you can transact
Ping
or
Traceroute
function to check connectivity of your network in the following screen.
