TL-WR1043ND
450Mbps Wireless N Gigabit Router
-37-
Figure 4-20 WPA/WPA2
– Personal
PSK Password -
You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the router or can be found in Figure 4-3.
Group Key Update Period
- Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2- Enterprise -
It
’s based on Radius Server.
Version
-
you can choose the version of the WPA security on the drop-down list. The
default setting is
Automatic
, which can select
WPA (
Wi-Fi Protected Access) or
WPA2
(
WPA version 2) automatically based on the wireless station's capability and request.
Encryption -
You can select either
Automatic
, or
TKIP
or
AES.
Note:
If you check the
WPA/WPA2-Enterprise
radio button and choose
TKIP
encryption, you will
find a notice in red as shown in Figure 4-21.
Figure 4-21 WPA/WPA2 - Enterprise
Radius Server IP -
Enter the IP address of the Radius server.
Radius Port -
Enter the port number of the Radius server.
Radius Password -
Enter the password for the Radius server.
Group Key Update Period -
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WEP -
It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-22.
