TL-WR1043ND
450Mbps Wireless N Gigabit Router
-61-
Note:
If you set the service port of the virtual server as 80, you must set the Web management port on
System Tools
–> Remote Management
page to be any other value except 80 such as 8080.
Otherwise there will be a conflict to disable the virtual server.
4.11.2 Port Triggering
Choose menu
“
Forwarding
→
Port Triggering
”, you can view and add port triggering in the next
screen (shown in Figure 4-56). Some applications require multiple connections, like Internet
games, video conferencing, Internet telephoning and so on. Port Triggering is used for some of
these applications that cannot work with a pure NAT router.
Figure 4-56
Port Triggering
To add a new rule, follow the steps below.
1. Click the
Add New…
button, the next screen will pop-up as shown in Figure 4-57.
2. Select a common application from the
Common Applications
drop-down list, then the
Trigger Port
field and the
Incoming Ports
field will be automatically filled. If the
Common
Applications
do not have the application you need, enter the
Trigger Port
and the
Incoming Ports
manually.
3. Select the protocol used for Trigger Port from the
Trigger Protocol
drop-down list, either
TCP
,
UDP
, or
All
.
4. Select the protocol used for Incoming Ports from the
Incoming Protocol
drop-down list,
either
TCP
or
UDP
, or
All.
5. Select
Enable
in
Status
field.
6. Click the
Save
button to save the new rule.
