TL-WR1043ND
450Mbps Wireless N Gigabit Router
-64-
Figure 4-59 UPnP Setting
Current UPnP Status -
UPnP can be enabled or disabled by clicking the
Enable
or
Disable
button. This feature is enabled by default.
Current UPnP Settings List -
This table displays the current UPnP information.
App Description
- The description about the application which initiates the UPnP
request.
External Port
- The port which the router opened for the application.
Protocol
- The type of protocol which is opened.
Internal Port
- The port which the router opened for local host.
IP Address
- The IP address of the local host which initiates the UPnP request.
Status
- Either Enabled or Disabled. "Enabled" means that the port is still active;
otherwise, the port is inactive.
Click the
Enable
button to enable UPnP.
Click the
Disable
button to disable UPnP.
Click the
Refresh
button to update the Current UPnP Settings List.
4.12 Security
Figure 4-60 The Security menu
There are four submenus under the Security menu as shown in Figure 4-60:
Basic Security
,
Advanced Security
,
Local Management
and
Remote Management.
Click any of them, and you
will be able to configure the corresponding function.
