TL-WR641G
108M Wireless Router User Guide
- 54 -
Figure 4-48
To add static routing entries:
Click the
Add New
button. (pop-up Figure 4-49)
Enter the following data:
¾
Destination IP Address
-
The
Destination IP Address
is the address of the network or
host that you want to assign to a static route.
¾
Subnet Mask
-
The
Subnet Mask
determines which portion of an IP Address is the
network portion, and which portion is the host portion.
¾
Gateway
-
This is the IP Address of the gateway device that allows for contact between the
router and the network or host.
Select
Enabled
or
Disabled
for this entry on the
Status
pull-down list.
Click the
Save
button to save it.
Figure 4-49
To modify or delete an existing entry:
¾
Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
¾
Modify the information.
¾
Click
the
Save
button.
Click the
Enable All
button to make all entries enabled.
Click the
Disabled All
button to make all entries disabled.
Click the
Delete All
button to delete all entries
