32
Chapter 4
Configure the Router in Wireless Router Mode
•
2.4GHz
- Select this checkbox to enable the 2.4GHz wireless network.
•
Network Name
(SSID)
- Enter a value of up to 32 characters. The same Name (SSID)
must be assigned to all wireless devices in your network.
•
Hide SSID
- Select this checkbox if you want to hide the 2.4GHz network name (SSID)
from the Wi-Fi network list. In this case, you need to manually join the network.
•
Security
- Select an option from the
Security
drop-down list.
•
None
- No security. It is highly recommend you enable the wireless security to
protect your wireless network from unauthorized access.
•
WPA-PSK/WPA2-Personal
- It’s the WPA/WPA2 authentication type based on
pre-shared passphrase. It’s also the recommended security type.
•
WPA /WPA2-Enterprise
- It’s based on Radius Server.
•
WEP
- It is based on the IEEE 802.11 standard.
•
Version
- Keep default version value.
•
Encryption
- Select
Auto
,
TKIP
or
AES
. We recommend you keep the default settings.
•
Transmit Power
- Select
High
,
Middle
or
Low
to specify the data transmit power. The
default and recommended setting is
High
.
•
Channel Width
- This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems
with another nearby access point. If you select auto, then AP will choose the best
channel automatically.
•
Channel
- This field determines which operating frequency will be used. The default
channel is set to
Auto
. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
•
Mode
- You can choose the appropriate “Mixed” mode.
