43
Chapter 4
•
Ignore Ping Packet From WAN Port
- The default setting is disabled. If enabled, the
ping packet from the Internet cannot access the router.
•
Forbid Ping Packet From LAN Port
- The default setting is disabled. If enabled, the
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click
Save
.
4. Click
Blocked DoS Host List
to display the DoS host table by blocking.
4. 9. 3. Local Management
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the router.
2. Go to
Security
>
Local Management
, and you can block computers in LAN from accessing
the router.
For example
, if you want to allow PCs with specific MAC addresses to access the router’s
web management page locally from inside the network, please follow the instructions
below:
1 ) Select
Only the PCs listed can browse the built-in web pages to perform
Administrator tasks
.
2 ) Enter the MAC address of each PC separately. The format of the MAC address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
MAC addresses can use the password to browse the built-in web pages to
perform administrator tasks.
3 ) Click
Add
, and your PC’s MAC address will also be listed.
4 ) Click
Save
.
Note:
If your PC is blocked but you want to access the router again, press and hold the
Reset
button to reset the router to the
factory defaults.
