63
Chapter 4
3. Select your local
time zone
.
4. Enter the
Date
in Month/Day/Year format.
5. Enter the
Time
in Hour/Minute/Second format.
6. Click
Save
.
¾
To set time automatically:
7. Select your local
time zone
.
8. Enter the address or domain of the
NTP Server I
or
NTP Server II
.
9. Click
Get GMT
to get time from the Internet if you have connected to the Internet.
¾
To set Daylight Saving Time:
1. Select
Enable DaylightSaving
.
2. Select the start time from the drop-down list in the
Start
field.
3. Select the end time from the drop-down list in the
End
field.
4. Click
Save
.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
4. 17. 2. Diagnostic
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the router.
2. Go to
System Tools
>
Diagnostic
.
