4
Chapter 1
1. 2. 2. The Back Panel
The following parts (view from left to right) are located on the rear panel.
Item
Description
ON/OFF
For turning on or off the router.
Power Port
For connecting the router to a power socket via the provided power adapter.
Wi-Fi/WPS button
To enable the wireless function, press and hold this button for about 6 seconds.
To enable the WPS function, press and hold this button for about 3 seconds. If
you have a WPS-supported device, you can press this button to quickly establish
connection between the router and your device and automatically configure wireless
security for your wireless network.
Reset Button
Use a pin to press and hold this button until the LED blinks to reset the router to its
factory default settings.
WAN Port
For connecting to a DSL/Cable modem, or an Ethernet port.
LAN Ports (1/2/3/4)
For connecting your PCs or other wired network devices to the router.
Antennas
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
performance.
