Section 3 – Operating Instructions
15
3.4
Selecting the Pool Pump Timer Cycle
The
easyCHEM 770
is fitted with a 240V 10A mains power outlet for your pool pump which is
controlled by a Pump Timer system built into the unit. To make its operation as simple as possible,
this timer has several automatic pre-sets. A custom program can also be entered, if required.
3.4.1 To select the default Summer/Winter program
The
easyCHEM 770
is provided with an automatic Summer and Winter timer program for the pool
pump. This program reduces the amount of time that the pump operates in Winter, as less filtration
is required when the pool is not in use.
The result is a saving for your power bill and for the environment by reducing the electricity being
used.
1. Press to display the Pump Timer menu…
Pool Pump
>Timed <
↓
2. Select
‘
→
Timed
’ from the menu and press
to select the default Timer program.
The default program operates the Pool Pump as follows…
Summer : 06:00 to 10:00 and 15:00 to 19:00.
Winter
: 06:00 to 10:00 only.
For the Southern Hemisphere…
The
easyCHEM 770
changes to Winter mode on the 15
th
of May.
The
easyCHEM 770
changes to back to Summer mode on the 15
th
of August.
For the Northern Hemisphere…
The
easyCHEM 770
changes to Winter mode on the 15
th
of November.
The
easyCHEM 770
changes to back to Summer mode on the 15
th
of February.
To change between Southern and Northern Hemisphere…
1. Press to enter the Technical Menu area.
2. Press until ‘
→
Summer/Winter
’ is selected and press
…
>Southern
↓
Northern
3. Press or
to select ‘
Southern
’ or ‘
Northern
’ as required and press
.
