Section 1 – Introduction
6
1.3
Summary of Keypad Buttons
Press to check and/or re-set the ORP set point. Returns to normal display if no key is
pressed for 10 seconds.
Press to check and/or re-set the pH set point. Returns to normal display if no key is
pressed for 10 seconds.
Press to access the technical menu area. Also used as an “escape” key to quit menus
and data entry screens without saving changes.
Press to activate Auto Control mode. The
easyCHEM 770
will automatically add
Chlorine and Acid as required.
Press to place the
easyCHEM 770
into Standby mode. The
easyCHEM 770
will not add
any chemicals, regardless of the readings.
Press to select the desired Pool Pump Timer cycles. See section 3.4 for full details.
Press to scroll up when setting data or making menu selections.
Press to scroll down when setting data or making menu selections.
Press to select and save new data and system settings.
