Section 1 – Introduction
6
1.3
Specifications
Peristaltic Pump
•
The
easy
FLOW-VS
has 1 x built-in Peristaltic Pump.
•
Chemical resistant Santoprene pump tubing.
•
Small pump tubing produces 1.6 Litres / Hour at Full setting
Standard large pump tubing produces 5 Litres / Hour at Full setting
Power
•
24V DC, 500mA / 1 Amp AC/DC Adaptor to suit country of destination is supplied.
•
The
easy
FLOW-VS
unit draws approximately 200 mA of current.
Standard Control
•
Dose Rate control allows selection of OFF, Dosing Rate and Full speed.
External Control
•
External On and Off switching control, using the Dose Rate setting for constant pump speed.
•
External 4-20 mA or 0-1V control which adjusts the speed of the pump according to the input
signal.
Calibration
Zero calibration for 4 – 20 mA External Control operation.
