May-20
Product Code: PROTRJA20T
Made in China to TQB Brands Pty Ltd Specifications
Page 3
Visit us at www.tqbbrands.com.au
SAFETY INSTRUCTIONS
WARNING
FAILURE TO READ THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE & PERSONAL INJURY
Support load by appropriate means after lifting
Do not exceed rated capacity
Centre load on the jack
Only use attachments and/or adapters supplied with or
sold specifically for the jack
Only lift areas of the vehicle designated by the vehicle
manufacturer.
Use as lifting device only
Use only on hard, level surface
Do not modify jack
SAFETY OPERATING INSTRUCTIONS
DO NOT exceed the maximum lifting load capacity of 20,000kg.
Only use this Truck jack on a surface that is stable, level, smooth, dry and capable of sustaining the load. Keep the surface
free from unrelated materials and ensure that there is adequate lighting.
DO NOT use on tarmac, or any other soft surface as the Truck Jack may sink or topple.
Vehicle must be properly and adequately supported with AS Approved Support Stands immediately after the lift and
before commencing work with this Truck Jack.
Always centre the load on the saddle of this Truck Jack and be sure the vehicle is stable before raising or lowering.
DO NOT operate this Truck Jack when you are tired or under the influence of alcohol, drugs or any intoxicating medication.
DO NOT allow untrained persons to operate this product and DO NOT make any modifications to this product.
DO NOT tamper with the safety valve.
DO NOT use brake fluid or any other improper fluid to refill or top up the hydraulic system of this Truck Jack. Only use
good quality hydraulic jack oil.
DO NOT expose the Truck Jack to rain or any other kind of inclement weather.
Use a qualified person to maintain the Truck Jack in good condition. Keep the Truck Jack clean for best and safest
performance.
Use approved personal protection safety equipment such as eye protection, non skid boots, full face impact shield and
heavy duty work gloves. Keep proper footing and balance, do not overreach.
This Truck Jack should be used for lifting and lowering only. The raised load should be supported on approved support
stands. No person should get any part of the body under a load that is supported by this jack.
Position the jack to only lift on the areas of the load specified by the vehicle manufacturer.
Use support stands – after lifting the load always support the load with appropriately rated support stands before working
on the load.
Do not overload this jack beyond its rated capacity. Overloading this jack beyond its rated capacity can cause damage to
or failure of the jack.
Keep hands & feet clear of the jack hinge mechanism & ground contact area when lowering the load.
NEVER LIFT THE LOAD OFF AIRBAG BRACKETS. ALWAYS LIFT OFF AN AXLE OR CHASSIS LIFT POINT
THIS JACK IS A LIFTING DEVICE ONLY & IS DESIGNED FOR LIFTING PART OF THE TOTAL VEHICLE/LOAD.
DO NOT MOVE OR DOLLY THE VEHICLE/LOAD WHILST THE VEHICLE/LOAD IS ON THE JACK.
