9 |
Figure 1
Front View and Top View of CurveX 4
1. POWER button
Press one second to power on
2. START button
Press to start logging
3. STOP button
Press to stop logging
4. Logging LED
Red
LED indicates CurveX 4 is logging
5. Paint LED
Red
partial cure,
Orange
active,
Green
full cure
6. Battery LED
Shows battery status* when powered on:
Red
<25%,
Orange
25% to 75%,
Green
> 75%
7. Thermocouple connectors 1 - 4
Connect up to four probes
8. USB type C port
Connect USB cable to charge and/or download data
*After 300 cycles charge from 0 to 100% the battery will retain a capacity of 80%. In general such battery
need replacement after approx. 2 years continuous use.
7
1
4
2
6
5
3