7
2.
Downloading data and configuring the CurveX 3 Basic
The CurveX 3 Basic is a logger without a display. You will have to use Ideal Finish Analysis to
download data and change the settings of the logger. The license key and memory stick with
the Ideal Finish Analysis software are part of the CurveX 3 basic package. For the installation of
the software you are referred to the software manual. To obtain your CurveX 3 Basic license
key you are referred to the Ideal Finish Analysis Quick Start Manual.
After the installation of the software you can connect the logger to your computer and access
the
Logger
menu where the following options are available. For information about installing
the software and connecting the logger you are referred to the software manual.
Step 1.
Power on the data logger by pressing the POWER button (see figure 1, position 1)
and start the Ideal Finish Analysis software.
Step 2.
Connect the USB connector to the CurveX 3 Basic (see figure 1, position 8).
Step 3.
Connect the other side of the USB cable to the PC.
Step 4.
Choose Logger from the menu. The following options are available:
•
Download all data to PC
•
Download Express
•
Real Time…
•
User settings
•
Configure & test
Logger menu
—
Download all data to PC…
2.1
After selecting this menu option a wizard appears where you can:
•
Set the download folder.
•
Select a template in which the settings of the oven, the probe layout and the paint type
are defined.
•
Select the batches to be downloaded.
Logger menu
—
Download Express
2.2
Ideal Finish Analysis can speed up the printing of a report at the click of a single button.
Switch TQC Ideal Finish Analysis to advanced mode to enable your line operators to print a
report based on a template for specific processes.
Logger menu
—
Real Time…
2.3
Use this option to view and analyze data the moment they are measured.
Summary of Contents for CurveX 3 Basic
Page 1: ...1 CurveX 3 Basic Article number CX3005 User Guide V1 1 0916...
Page 14: ...14...
Page 15: ......
Page 16: ......