General
TR-Electronic GmbH 2013, All Rights Reserved
Printed in the Federal Republic of Germany
Page 8 of 29
TR - ECE - BA - GB - 0101 - 05
02/21/2018
1.4 Used abbreviations / Terms
A**58*
Explosion protection
enclosure
with integrated measuring system of
the 58 series, all versions.
EU
E
uropean
U
nion
EMC
E
lectro
m
agnetic
c
ompatibility
ESD
E
lectro
S
tatic
D
ischarge
IEC
I
nternational
E
lectro-technical
C
ommission
VDE
Association for Electrical, Electronic & Information Technologies
1.5 Product description
The aluminum explosion protection
enclosure
with built-in systems and integrated
evaluation electronics serves the detection of changes in angle for fixed installations.
The changes in angle are transmitted to the evaluation electronics via shaft.
The explosion protection
enclosure
has the ignition protection type
"n": non-sparking operating equipment (potential gas-explosive atmosphere) and
"t": protection by the
enclosure
(potential dust-explosive atmosphere)
Through its manner of construction, the types of ignition protection and additional
measures, the
enclosure
is suitable for the incorporation of non-explosion protected
installation devices such as the measuring system of the series 58.
The construction, as well as the interaction of the individual components and the
housing with regards to their possibilities for use in potentially explosive areas, are
tested by the company TR-Electronic GmbH and confirmed by identification with the
nameplate.