Troubleshooting and diagnosis options
TR-Electronic GmbH 2016, All Rights Reserved
Printed in the Federal Republic of Germany
Page 102 of 103
TR - ECE - BA - DGB - 0131 - 02
10/31/2018
7.2.2.11 Software version
Diagnostic bytes 26-27 indicate the internal software version of the measuring system.
They consist of the revision number and revision index (e.g. 1.40 corresponds to
0000 0001 0100 0000 or 0140 (hexadecimal code) )
Extended diagnosis, byte 26 - 27
Byte 26
Revision number
Byte 27
Revision index
7.2.2.12 Operating hour counter
Extended diagnosis, byte 28 - 31
The diagnostic bytes represent an operating hour counter which is incremented by
one digit every 6 minutes. The measuring unit for operating hours is thus 0.1 hours.
If this function is not supported, the operating hour counter is set to the maximum
value FFFFFFFF(hexadecimal code).
The measuring systems count the operation hours. To keep the bus load small, a
diagnostic telegram is sent with the latest counter state after every parameter setting
or if an error must be reported. If everything is correct and only the counter has
changed, no new diagnosis telegram is sent. Therefore at the on-line diagnosis the
status is always displayed by the last parameter setting.
7.2.2.13 Offset value
Extended diagnosis, byte 32 - 35
The diagnostic bytes indicate the offset in relation to the absolute scanning position
which is calculated during the execution of the preset function.
7.2.2.14 Manufacturer-specific offset value
Extended diagnosis, byte 36 - 39
The diagnostic bytes indicate an additional manufacturer-specific offset in relation to
the absolute scanning position which is calculated during the execution of the preset
function.
7.2.2.15 Number of increments per revolution
Extended diagnosis, byte 40 - 43
The diagnostic bytes indicate the configured increments per revolution of the
measuring system.
7.2.2.16 Measuring length in increments
Extended diagnosis, byte 44 - 47
The diagnostic bytes indicate the configured measuring lengths in increments of the
measuring system.