Basic safety instructions
TR-Electronic GmbH 2011, All Rights Reserved
Printed in the Federal Republic of Germany
Page 80 of 139
TR - ELE - BA - DGB - 0022 - 04
02/08/2016
2.3 General risks when using the product
The product, hereinafter referred to as
"the
measuring system"
, is manufactured
according to state-of-the-art technology and accepted safety rules.
Nevertheless,
improper use can pose a danger to life and limb of the user or third parties, or
lead to impairment of the measuring system or other property!
Only use the measuring system in a technically faultless state, and only for its
designated use, taking safety and hazard aspects into consideration, and observing
this
User Manual
! Faults which could threaten safety should be eliminated without
delay!
2.4 Intended use
The measuring system is used to measure linear movements and to condition the
measurement data for the subsequent control of industrial control processes.
Particularly the measuring system is designed for the use of distance measurements
for the detection of the position and positioning of:
High-bay storage devices and lifting gears
Crane systems
Side-tracking skates and truck storage vehicles
Transfer machines
Intended use also includes:
observing all instructions in this Assembly Instruction and the interface-specific
User Manual,
observing the nameplate and any prohibition or instruction symbols on the
measuring system,
observing the enclosed documentation, e.g. product insert, connector
configurations etc.,
observing the operating instructions from the machine or system manufacturer,
operating the measuring system within the limit values specified in the technical
data (Assembly Instruction / User Manual).