Parameterization and Configuration
TR-Electronic GmbH 2018, All Rights Reserved
Printed in the Federal Republic of Germany
Page 152 of 167
TR - ELA - BA - DGB - 0027 - 03
11/12/2019
6.4.1.7 Unit v [0.01mm/s]
This parameter defines the resolution of the speed output in 0.01 mm/s.
Lower limit
1:
1/100 mm/s
Upper limit
100 000: 1 m/s
Default
100:
1 mm/s
6.4.1.8 Handling error
Selection
Value Description
Default
Alarm only in process data
(status)
0
An error is only indicated via the cyclic input
data, no PROFINET diagnostic alarm is
triggered, see chapter 6.4.2.2.1 on
page 154.
Send alarm and process data
(status)
1
An error is indicated via the cyclic input data
and a PROFINET diagnostic alarm is also
triggered, see chapter 6.4.3 on page 158.
X
