OPERATING INSTRUCTIONS
Product Features
1. Jumbo display 4 channel LCD count-down / count-up timer
with clock and alarm features.
2. 6 digit shows hour, minute and second setting for timers and
clock.
3. Automatic count-up after timer counts down to zero.
4. Count-down timer: Maximum setting is 99 hours, 59 minutes
and 59 seconds. Counts down at 1 second resolution.
Count-up timer: Maximum count-up range is 99 hours, 59
minutes and 59 seconds. Counts up at 1 second resolution.
5. Memory recall function for count-down timers.
6. Timer alarm sounds for 1 minute when timer counts down to
zero.
Clock Mode
1. Press and hold the clock button to enter clock mode. Preset
time (hours, minutes and seconds) and flashing colon will
display.
2. Press and hold START/STOP button for 3 seconds to toggle
12/24 hour format.
Clock Setting Mode
1. Press and hold clock button for 3 seconds (until beep) to enter
time setting mode. "HOUR", "MINUTE", "SECOND" and colon
flash on display. The "P" indicator shows in 12 hour format.
2. Press the HOUR button to advance hour setting. Press and
hold for 2 seconds for fast setting.
3. Press the MINUTE button to advance minute setting. Press
and hold for 2 seconds for fast setting.
4.
www.
.com
information@itm.com
1.800.561.8187
