Interactive Touch Monitor-TD Series
Interaction in Life
9
Basic Operation
Please follow instructions as below when you use interactive touch monitor.
Power on
After plug with power, indicator in front panel is red. To press
POWER
button, red indicator with flash for
5 seconds, and then TV and PC will be power-on. Indicator for TV is blue, PC is green. To press button
sleep
or
power
button on remote control to power on TV only.
Power off
TV and PC power-off can operate by one button as following,
Initial State
POWER button(front panel) function
PC power off/TV power on
PC power on
PC/TV power on
PC power off, TV will power off after
PC/TV power off
PC power off, TV power on
Switch to the signal source of the PC or open the TV first, then turn it off, because there maybe
some operating procedures or documents on the PC that needs to be saved.
In case of accident that need to force off the PC, press the POWER button continuously over 3
seconds, then the PC will be forced off.
Backlight shut down
To press
sleep
button to shut down backlight.TV indicator will turn to red. Meanwhile, other parts of
machine remains working. To press
sleep
button, backlight is on, indicator TV indicator turns to blue
again.
Select signal source
Through button
①
press SOURCE on the front panel, to pop up signal source list
②
select signal source from top to bottom with P+/ P-.
③
press SOURCE once again to confirm signal source.
Through remote control
①
press SOURCE on remote control, to pop up signal source list.
②
select signal source with ▲▼ in remote control.
③
press ENTER in remote control to confirm signal source.
Connection and Set-up
Backlight automatic shut down
There is distance sensor in front panel, backlight will be shut down
automatically when there is shelter in the 10cm distance from the screen and
lasts 20-25 seconds.
This function is designed for education, especially for cabinet and compound
solution with black board or whiteboard, can save power and keep machine
longer life.
