Shelf Installation
Step 1: Determine the desired height of the shelf.
Step 2: Insert the top of the clip into the desired notch then push
the bottom into the notch below the top notch.
9
Step 3: Repeat Step 2 for all 4 clips required for each shelf. Make
sure they are all aligned with one another.
Attention:
Remove clips by pulling up on the bottom part of the clip.
Step 4: Move the shelf into the
safe angled diagonally (left side
lower then the right side) and
move it above the clips before
leveling the shelf. Bring the shelf
down onto the clips slowly.
Caution:
Do not exceed 25
pounds on a single shelf.
Overloading shelves can cause
shelves or clips to break.
