GAT-Pro User Manual
For More Information:
Please contact TrackingTheWorld, 1633 Bayshore Highway, Suite 390, Burlingame, CA. 94010, USA
Phone: +1.650.692.8100
–
Email:
info@trackingtheworld.com
–
Website:
www.trackingtheworld.com
Copyright © TrackingTheWorld. All rights reserved. Information in this publication supersedes that in all previously published material. Specification and price
change privileges reserved. All trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
TTW-GAT-Pro-UM002
- 7 -
1. Introduction
GAT-PRO is a powerful GPS tracker designed for fixed asset tracking applications.GAT-PRO work
with two CR123A lithium-batterys.GAT-PRO wakes up every 1-40hours and sends the info and then
return to deepsleep.GAT-PRO can standby 1000days. With built-in motion sensor, GAT-PRO can also
detect the motion of asset all the time and give a warning message. Based integrated @track protocol,
the GAT-PRO can communicate with a backend server through the GPRS/GSM network to transfer
reports of emergency, geo-fence boundary crossings, low battery or scheduled GPS position along
with many other useful functions. System Integrators can easily setup their tracking systems based on
the full-featured @Track protocol.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
1.1. Reference
Table 1.
GAT-PRO Protocol Reference
SN Document name
Remark
[1] GAT-PRO @SMS & @Track Interface Protocol
The @SMS & @Track protocol
interface between GAT-PRO and
backend server.
1.2. Terms and Abbreviations
Table 2.
Terms and Abbreviations
Abbreviation Description
AGND
Analog Ground
AIN
Analog Input
DIN
Digital Input
DOUT
Digital Output
GND
Ground
MIC
Microphone
RXD
Receive Data
TXD
Transmit Data
SPKN
Speaker Negative
SPKP
Speaker Positive
