The Spider MT-G is
NOT
a waterproof or sealed
device. Care must be taken to ensure the device
kept away from water or any other liquids.
Figure 3 - Mounting dimension of a Spider MT-G
Antenna
Proceed to install the antenna in the pre-determined location. Disconnect power to the modem unit if already
connected before connecting the antenna. Route all antenna cables through vehicle channels, in the headliner,
underneath the carpet, and behind the vehicle panels. The antenna should be mounted horizontally without
obstruction to the sky.
Care needs to be taken when connecting the antenna since the right type of antenna will be required for proper
operation of the modem. The antenna connector on the GSM/GPRS Spider MT-G model is a TNC female connector.
The antenna has to be connected to the connector labeled “MODEM ANT”. See Figure 8 – GSM
Summary of Contents for Enfora Spider MT-G
Page 5: ...2 Product Specifications...
