Spot installation guide
Safety precautions
Environmental compliance:
SAE J1455, EN/IEC 60068-2-1:2007
SAE J1455, EN/IEC 60068-2-2:2007
SAE J1455, EN/IEC 60068-2-27:2008
SAE J1455, EN/IEC 60068-2-31:2008
SAE J1455, IEC 61701:2011, EN/IEC 60068-2-52
SAE J1455, EN/IEC 60068-2-64:2008
SAE J1455, EN/IEC 60068-2-78:2001
SAE J1455, (IEC 60529+A1+A2):2013
SAEJ1455 (Motor oil, Gasoline,
Diesel fuel, Hydraulic fluid, Brake fluid,
Transmission fluid , Glycol and water mixture)
Pacemakers, defibrillators etc.:
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6”)
inches (15 cm) be maintained between a handheld
wireless phone and an ISO 14117:2012 compliant
pacemaker/heart defibrillator to avoid potential
interference with the pacemaker/heart defibrillator.
The following precautions applies:
• The TU50X-1 SPOT unit is not intended for handheld
use or to be worn on the body.
• It is recommended that a minimum separation of
inches (20 cm) is to be maintained between the TU50
1 SPOT unit and any persons’ body at all times.
Spot installation guide
Cold
Dry Heat
Shock
Drop
Salt spray/mist
Random vibration
Damp heat steady state
Degrees of protection (IP code): IP66K, IP69K
Chemicals/oils wipe protection
:
separation of six (6”)
a handheld
compliant
defibrillator.
unit is not intended for handheld
• It is recommended that a minimum separation of (8”)
between the TU50X-
unit and any persons’ body at all times.