CAMON TC07 Turf Cutter
TC07 Turf Cutter
Page 11
6.0
Safety Instructions Starting and Operating
6.1 To Start the Engine
Using the dipstick provided,
check the engine oil level. Top
up with SAE 10W/30 oil, API SJ
or equivalent, if the dipstick is
clear of oil.
Check the fuel level. Refill as
necessary and as determined
by the fuel tank type – see
diagram.
Switch the engine ignition
switch to the ON position.
Turn the fuel tap located on the
engine carburetor to the ON
position. If the engine is cold or
has not been operated recently
set the choke lever on the
carburetor to the ON position.
Pull the engine recoil handle slowly until it engages then pull hard and fast to start
the engine.
After the start, guide the cord back into its position. Do not let it snap back.
Once the engine has started, if the choke lever has been used, return this to its OFF
position after the engine has run for a few seconds.
