CAMON TC07 Turf Cutter
TC07 Turf Cutter
Page 15
7.3.2 Change Engine Oil
Refer to the engine manufacturer’s manual for location of components and
more detailed assistance.
Do not change the oil if the engine is hot.
The first oil change is after 50 hours of work.
Subsequent oil changes should be made after each 100 hours of work.
At extreme temperatures or conditions change the oil after every 50 hours.
Open the drain plug on the engine and the filling plug and drain the oil into
a suitable container or use a suction pump to remove oil through filler neck.
Ensure the waste oil is disposed of properly.
Re-fit the drain plug and tighten.
Fill fresh engine oil through the oil filling opening. Use a funnel or similar
device for ease of filling.
Replace the oil filler plug and tighten.
7.3.3 Air Filter
Inspection Check:
Remove the air cleaner cover and inspect the filter elements.
Cleaning:
See diagram below containing information provided by Honda.
7.3.4 Spark Plug
Clean and replace.
